Bevel brushes crimped INOX-TOTAL, shank-mounted

INOX-TOTAL bevel brush crimped KBUIT dia. 50x10 mm shank dia. 6 mm stainless steel wire dia. 0.20

Item number:
43225017
EAN:
4007220936474

Login / Register
Choose options
Dia. external
Dia. filament material
Filament material
Technical information
INOX-TOTAL bevel brush crimped KBUIT dia. 50x10 mm shank dia. 6 mm stainless steel wire dia. 0.20

Dia. external
50 mm
Dia. filament material
0.2 mm
Dia. shank
6 mm
Filament material
Stainless steel wire (INOX)
Length, filament
10 mm
Length, total
1-15/16
Length, total
49 mm
Max. RPM
15000 RPM
Mounting system
Shank
RPM, optimum, from
6000 RPM
RPM, optimum, to
9800 RPM
Width
10 mm
Packaging unit
10 pieces
Description

Excellent for medium-duty brushing such as deburring, cleaning, and removal of heat discolouration.

In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type. They are particularly well-suited to use in extremely critical environments.

In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) withstands temperatures up to 450 °C.

Advantages
  • Optimal access to hard-to-reach areas such as inner edges, grooves and keyways.
  • Highly flexible, enabling optimal adjustment to the workpiece contour.
  • Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A).
  • Very good corrosion resistance.
  • Creates fine surfaces.
  • The brush is degreased and does not leave any oil residue on the workpiece.
Recommendations for use
  • Please observe the recommended rotational speeds.
  • For the best results, use a tool drive with a minimum output of 300 watts.
Safety notes
  • When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.
Materials that can be worked
Aluminium
Bronze
Cobalt-based alloys
Hard non-ferrous metal
High-temperature-resistant materials
Nickel-based alloys (e.g. Inconell and Hastelloy)
Nickel or titanium-based superalloys
Other non-ferrous metals
Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys
Applications
Cleaning
Deburring
Derusting
Paint stripping
Removing heat discolouration
Removing oxide layers
Roughening
Drive types
Flexible shaft drive
Power drill
Straight grinder
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.