Flap drums

Flap drum dia. 100x100 keyway 19 mm A120 for general use on drum grinders

Item number:: 44783120
EAN:: 4007220770528

Technical data Change variant

PFERDWORLDWIDE

Choose options

Dia. external

100 mm

Grit size

40 60 80 120 150 180

Packaging unit

Reset Filter

Matching accessories & spare parts

Grinding oil 410 Fe

Grinding oil 411 NE

Grinding oil 410/1 Fe

Grinding oil 410/5 Fe

Grinding oil 411/1 NE

Grinding oil 411/5 NE

Grinding oil 412 ALU

Grinding oil 412/1 ALU

Grinding oil 412/5 ALU

Technical information

Flap drum dia. 100x100 keyway 19 mm A120 for general use on drum grinders

Abrasive: Aluminium oxide A
Dia. external: 100 mm
Dia. hole: 19 mm
Grit size: 120
Max. RPM: 6100 RPM
RPM, optimum: 3800 RPM
Width: 100 mm
Packaging unit: 1 piece

Description

Suitable for general work on medium-sized and large metal surfaces, e.g. fine grinding work on large radii in container, kitchen and apparatus construction, and achieving uniform finishes (grinding patterns) on large surfaces and contours in manual applications. Suitable for all conventional keyway systems.

Advantages

Highly flexible, enabling optimal adjustment to the contour.
Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed.

Recommendations for use

Reducing the contact pressure and the peripheral speed and adding grinding oil diminishes tool wear and thermal load on the workpiece.
To increase the stock removal rate, it is advisable to use a coarser type of grit instead of increasing the contact pressure. This will prevent unnecessary tool wear and thermal load on the workpiece.
The increase in cutting speed leads to a slightly finer surface quality. Increasing the contact pressure makes the surface slightly coarser. The softer the material that is being worked on, the coarser the surface (when using the same grit size).
For the best results, use at a recommended cutting speed of 15-30 m/s.
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
For the best results, use a tool drive with an output of 1,000–1,500 watts.

Ordering notes

The 19 mm hole diameter with 4 keyways fits all conventional drum grinders.

Safety notes

For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
The contact pressure must be significantly reduced if the specified optimum rotational speed is exceeded.
The maximum permitted peripheral speed is 32 m/s.

Materials that can be worked: Aluminium; Annealed cast iron; Brass; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)

Applications: Deburring; Leveling; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work; Work on weld seams

Drive types: Drum grinders

PFERDVALUE

Downloads

Flap drums

Flap drum dia. 100x100 keyway 19 mm A120 for general use on drum grinders

Matching accessories & spare parts

PFERD Newsletter subscription