Tungsten carbide burrs for general use, cut 3, oval shape TRE

Tungsten carbide burr oval TRE dia. 12x20 mm shank dia. 6 mm Z3 universal medium

Item number:: 21135106
EAN:: 4007220048931

Technical data

PFERDWORLDWIDE

Technical information

Tungsten carbide burr oval TRE dia. 12x20 mm shank dia. 6 mm Z3 universal medium

Cut: 3
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 20 mm
Length, total: 2,362
Length, total: 60 mm
RPM from, grey cast iron, white cast iron: 12000 RPM
RPM from, hard non-ferrous metals: 7000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 7000 RPM
RPM from, rust and acid-resistant steels: 7000 RPM
RPM from, soft non-ferrous metals: 12000 RPM
RPM to, grey cast iron, white cast iron: 16000 RPM
RPM to, hard non-ferrous metals: 9000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 9000 RPM
RPM to, rust and acid-resistant steels: 9000 RPM
RPM to, soft non-ferrous metals: 16000 RPM
Radius corner design: 5 mm
Packaging unit: 1 piece

Description

Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Oval burr according to DIN 8032 with cut conforming to DIN 8033.

Advantages

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
High surface quality.

Recommendations for use

To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Soft non-ferrous metal; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/220 RS PGAS 4/220 RS

Tungsten carbide burrs for general use, cut 3, oval shape TRE

Tungsten carbide burr oval TRE dia. 12x20 mm shank dia. 6 mm Z3 universal medium

Matching tool drive

PFERD Newsletter subscription