Wheel brush crimped RBU dia. 50x10 mm shank dia. 6 mm steel wire dia. 0.20

Technical information

Wheel brush crimped RBU dia. 50x10 mm shank dia. 6 mm steel wire dia. 0.20

Dia. external: 50 mm
Dia. filament material: 0.2 mm
Dia. shank: 6 mm
Filament material: Steel wire (ST)
Grit size: No information
Length, filament: 13 mm
Length, total: 2
Length, total: 50 mm
Max. RPM: 15000 RPM
Mounting system: Shank
Packaging: Industrial packaging
RPM, optimum, from: 7500 RPM
RPM, optimum, to: 11300 RPM
Width: 10 mm
Packaging unit: 10 pieces

Description

Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Advantages

Highly flexible, enabling optimal adjustment to the workpiece contour.
Long tool life through use of PFERD special wire.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

Wheel brushes crimped shank-mounted

Wheel brush crimped RBU dia. 50x10 mm shank dia. 6 mm steel wire dia. 0.20

PFERD Newsletter subscription